All Accessories

THE DIRT IS CALLING. GET AFTER IT IN THE FIXTURE MIPS® HELMET, FEATURING MODERN DESIGN AND MIPS TECHNOLOGY AND DEEP COVERAGE. AVAILABLE IN A WIDE RANGE OF COLOR OPTIONS, WITH A GENUINE ROC LOC SPORT FIT SYSTEM SO YOU DIAL-IN A PERFECT FIT QUICKLY.

FIXTURE is Universal Adult fit 54-61cm

VERCE is Universal Womens fit 50-57cm

“THEY SAID THE WORLD WAS FLAT…”
The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty. The Horizon is our Multiple award winning pedal design. Read here for MBR magazine 10/10 review

Designed in conjunction with 5 time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles.

Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services.

Available in a multitude of configurations and materials, this is a pedal ready to tackle whatever you can throw at it.

Horizon – Pro

With all of the features seen on the Horizon Sam Hill signature pedal, but in a much more stealth package with a black anodised platform including subtle laser etch graphics and accompanied by black adjustable pins. Available with both a Cro-Mo axle or Titanium axle.
“THEY SAID THE WORLD WAS FLAT…”
The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty. The Horizon is our Multiple award winning pedal design. Read here for MBR magazine 10/10 review

Designed in conjunction with 5 time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles.

Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services.

Available in a multitude of configurations and materials, this is a pedal ready to tackle whatever you can throw at it.

Horizon – Pro

With all of the features seen on the Horizon Sam Hill signature pedal, but in a much more stealth package with a black anodised platform including subtle laser etch graphics and accompanied by black adjustable pins. Available with both a Cro-Mo axle or Titanium axle.
“THEY SAID THE WORLD WAS FLAT…” The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty. The Horizon is our Multiple award winning pedal design. Designed in conjunction with 5 time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles. Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services. Available in a multitude of configurations and materials, this is a pedal ready to tackle whatever you can throw at it. Horizon – Pro. With all of the features seen on the Horizon Sam Hill signature pedal, but in a much more stealth package with a black anodised platform including subtle laser etch graphics and accompanied by black adjustable pins. Available with both a Cro-Mo axle or Titanium axle.

DDMD-200 Dual Density® E-GEL® Men’s Comfort w/ Waterproof Soflex Cover

The Serfas® Dual Density® line of saddles is constructed using our patented I.C.S. (Infinite Comfort System) technology. Made up of a soft flexible rubber base followed by two layers of soft and firm closed cell foam, and a final top layer of friction reducing Reactive Gel®.

Features Dual Density® Progressive Foam Technology, steel rails, and durable waterproof Soflex cover.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality.

The Small Oi Luxe fits 22.2mm bars.

Rear Vision Mirror with 360 Degree Rotation Keep yourself aware of traffic approaching you from the rear with this AZUR ORBIT bar-end-mounted bicycle mirror. Built with a Universal bar end fitting, the mirror features a swivel ball joint for 360 degree rotation so you can choose the viewing angle which suits your needs perfectly.

Anti-Glare Mirror Surface Suitable for day and night time use, its anti-glare mirror surface helps to cut down on headlight and sun glare while a reflective safety strip improves your visibility to other road users. Easy to install and able to fold for storage and protection the AZUR ORBIT rear vision bike mirror is a very reasonably priced safety accessory that every cyclist should own and use.

Easy mounting in bar end

A tough tubular aluminum rear rack designed specifically for mountain bikes. The perfect rack for classic loaded touring, commuting or just running errands. QuickTrack® compatible for use with any MTX TrunkBag and rear basket.

Even though says non-disc if your brake calipers are not in way can fit on a disc brake wheel.  Fits perfectly on FOCUS Jarifa 29" Wheel. 

Product No: TA2026-B

Syncros designed, complete line of bottle cages, with a low profile design and a side entry for easy access on full-suspension frames or small frame sizes. Made from a clever combination of carbon fiber and composite to keep the weight down and available in a large variety of colors, there is a bottle cage just for you. This cage is optimized for right handed entry. There is also a left handed version.

If you are right handed I find the 'left cage' is easier as you can steer bike with right hand and pull out bottle with your left!

We don't believe in batteries here at Beyond Byron E Bikes, so all our lights are rechargeable (and look great!).  

Silca's Oil Based Lube Silca's Synergetic drip chain lube offers similar performance of hot wax chain lube without the hassle. The Synergetic drip lube is only just shy of molten wax for efficiency but will last longer between re-lubing. Silca claim up to 800km between intervals!

New Formula Taking technology from F1, Silca has combined WS2 nano-scale tungsten disulfide with car valve lubricant ZDDP. The synergy created by the two products is claimed to reduce friction by 50% and wear reduced by 95%. This is due to the two additives forming a protective layer together.

Application For best results a clean drive chain is always going to be the best place to start. The bottle comes with a small needle applicator. This allows the user to administer the lube on each roller and ensures that excess lube isn't wasted. Silca claim that using the needle to readminister the lube, a single 59ml bottle will get the rider over 15,000km!

• 59ml bottle (up to 15,000km)

• Up to 800km per lube interval

• No required drying time

• Wet lubricant

WITH TECHNOGEL THAT MOLDS TO YOUR HANDS, AX SUEDE FOR DURABILITY, AND A MOISTURE-WICKING 4-WAY STRETCH UPPER, THE STRADE DURE SUPERGEL GLOVE IS THE ONE TO TAME THE ROAD WITH.

The standard by which all tires are judged

Ramped, directional tread design
Large cornering blocks
Single-ply, DoubleDown, and DH casings available
3C MaxxTerra, 3C MaxxGrip, and Super Tacky available on select models
Wide trail (WT) casing specs are optimized for 30-35mm inner width rims
With a tread design that deftly balances rolling speed with braking and cornering traction, it's hard to find fault with the Minion DHF. That's probably why it's one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there's a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs.

Refined and redesigned; ready to shred any line

Ramped and siped tread to roll fast and track straight under braking
Single-ply, DoubleDown, and DH casings available
3C MaxxTerra, 3C MaxxGrip, and Super Tacky available on select models
Wide trail (WT) casing specs are optimized for 30-35mm inner width rims
With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo! The Minion DHF is available in trail, enduro, and downhill specs.

Robust design makes this 12-speed chain extremely powerful and it easily stands up to the high-torque loads of e-bike drives.  Includes reusable quick link.

Robust design makes this 9-speed chain extremely powerful and it easily stands up to the high-torque loads of e-bike drives

Reusable Quicklinks for 12 Speed YBN and Shimano chains.  Always good to have as if your chain snaps its more than likely at the quick link, or if not, you can use a quick link to get home.

Quicklinks for 9 speed YBN and Shimano chains. Always good to have as if your chain snaps its more than likely at the quick link, or if not, you can use a quick link to get home.

Small but mighty, the Kepler E-bike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V e-bike system, this slick little light is loaded with 3 super bright red power LED's. Equipped with a pre-installed Bosch plug the Kepler E-bike Tail Light is ready to plug directly into any Bosch e-bike system. The Bosch plug can also easily be clipped off for direct wiring into other e-bike systems.

DETAILS
Includes Bosch E-bike System plug
Remove Bosch plug to work with any 6V-15V e-bike system
3 red power LEDs
Seatpost or seatstay mounting
220 degrees of visibility
25 Lumens
Tail light cable length is 48"

The Origami Rear Fender is super light, easy to install and fits almost any bicycle. Punch it out from its packaging, fold it along on the seams, and snap it onto the mount. Pack down and throw it into your backpack when the weather conditions improves.

Get the matching Origami Front Fender to complete your splash protection set!

DETAILS
Rear fender measures 445 mm (17.5") long and weighs 160 g (5.6 oz)
Rear fender installation manual (PDF)
Lifetime PDWarranty

The Origami Suspension Fork Fender is the perfect companion for your front and rear Origami fenders. It increases spray coverage to keep the grit from finding its way to your face. Made of ultra durable and flexible polypropylene, the Origami Suspension Fork Fender fits most suspension forks. The Origami Suspension Fork Fender also comes equipped with 4 super soft and strong quick attach straps that won't scratch your fork.

Add that extra flair to your wheelset with Muc-Off's Tubeless Valve Kit. No matter what kind rims your bike has this universal tubeless valve kit will suit with both flat and curved rubber bases included to  ensure a perfect seal. There is also a valve core remover that is integrated into a spare alloy cap! Brilliant! 

Colour: Purple

Features:

• 6061 Aluminum machined stem 
• 6061 Aluminum machined cap
• 4mm machined Allen Key slot for easy installation / removal
• Includes Valve Core Removal Tool (intergrated into spare alloy cap

This new and improved formula of the CeramicSpeed UFO Drip Chain Coating is even faster and longer lasting than the first formula.

If you don't want to remove the chain for dry waxing, this is the next best thing.  Proven in independent testing, comes very close to a full immersion dry wax.

The chain coating is developed to support all disciplines and is based on a non-toxic, non-flammable and bio-degradable formula.

Features

180ml / 6oz bottle contents
300 km. per coating
Up to 35 coatings per bottle
Over 15% faster than previous formula
Increased temperature stability - apply between 5-35oC / 41-95oF

Specifications

Size: 180ml (6oz)

How to apply

click here

For day to day riding, Molten Speed Wax is as far as we know – unbeatable.

Firstly – Waxing saves time – not adds time. Yes you need to pop chain off and stick in a pot to re wax vs dripping something on, but popping chains on and off with master links is very quick and easy. Turning a pot on and swishing a chain around in it later when the wax has melted is also not high on the difficulty scale! Yes overall it will add about 3mins of manual labour at the front end vs dripping more lube on – but you have an always beautifully clean drive train so you save all that time and much more not fighting the never ending drive train cleaning battle. The bigger your stable of bikes, the more time you save not having 2, 3, 5 bike chains and drivetrains to have to try stay on top of.

Secondly – Waxing is the only watts saving upgrade that also saves you proper $ in your wallet too. The parts longevity increase with waxing often needs to be experienced to be believed. Versus drip lubes, waxing simply has a few pretty much unassailable advantages.

1) It is solid and does not grab and hold every particle of dust and contamination, remaining very clean, and very low friction all the time. If your budget doesn’t stretch to race chains, just switching to waxing is the best low friction upgrade in itself.

2) Every re wax flushes out what little contamination is gathered leaving you with a beautifully clean, brand new looking chain every time.

3) After every re wax –  for “X” km your chain parts are articulating on two solid slippery wax surfaces,  pretty much leaving chain metal out of it. Drip lubes will have a liquid that is always “X” amount abrasive from contamination, abrading away directly on your chain metal. It is why drip lube chains wear out so fast. Drip lube chains usually hit 0.5 wear mark on park tool cc3.2 chain checker in 3000 to 6000km. MSW treated chains are usually 10,000 to 25,000km – the average for most is around the 15,000km range.  Your cassette and chain ring lifespan is similarly increased, so over time waxing saves you big $.

Chain wear (stretch) is caused by pins wearing thinner and the inner plate bore they articulate in wearing larger, allowing each link to be pulled a bit longer the more they wear (it is not a chains plates being stretched longer).  These are hardened steel parts being worn down from high pressure abrasive friction. The huge increase in chain lifespan using MSW is the clearest “proof of the pudding” day in day out very low friction of using MSW vs gritty liquid lubes.

The world of dirt, dust and mud is the perfect environment to be running solid lubricant vs a contamination absorbing liquid! Yes the harsher the conditions = re wax often – but popping chain into a pot frequently is not hard, especially when it is greatly extending the lifespan of your $550 xx1 eagle cassette and $170 chain!  (Oh and who doesn’t want a clean like new drivetrain all the time?)

TWO LEFT IN STOCK

Matching ramps to load E Bikes on this link

The best E bike car rack there is.

When it comes to transport of heavy bikes such as MTB or E-bikes, the e-SCORPION 2 would be the supreme choice. High load capacity, fully foldable, easy-to-use with great stability, durability and a touch of simplicity in design.

We think that E-Scorpion deserves to be a top choice for anyone who wants to carry 2 bikes, especially larger, heavy bikes or electric bikes. It’s a hugely versatile rack that can take a big range of different types of bikes. Whatever bike you have now (or in the future) the E-Scorpion should be able to accommodate it.

Bike carriers that are strong enough for electric bikes tend to be pretty beefy themselves, so handling these heavier bike carriers can be awkward. The Scorpion is a solid carrier at 18.1kg, but because it folds up it’s relatively very easy to move about and to fit, without straining your back. It’s even got an integrated transport wheel so you won’t have to do much lifting of the rack. Just wheel it to the tow ball in the folded position – there’s a handle above the tow ball clamp, so it’s an easy vertical lift. Place it over the tow ball – you’ll be standing above the tow ball, not some distance behind it. You’ll also find that the E-Scorpion stays level and does not crash to the ground when you let go of it. Tighten, lock, unfold – all parts click into place, including the number plate holder.

It’s particularly easy to tilt, with the tilt control just above the number plate. The lights are 5 function – they include a reversing light and a fog light if you have a 13 pin socket.

Other features and specifications:

• The patented conical fitting fits to all tow balls.
• The Buzz E-Scorpion is particularly well balanced – you can let go once you’ve placed it on the tow ball, which makes fitting the rack much easier.
• You mount it to the tow ball from folded, this gives you loads of space to fit it to the car (no bashing shins or straining your back).
• It’s easy to fit to the tow ball. Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning is included (using the integrated handle), depending on the tow ball, to make sure the carrier is firm.
• It sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps.
• The wheel holders will accommodate larger wheelbases; up to 129.5cm.
• Ratchet straps allow a quick and secure attachment of the wheels, long straps can accommodate tyres up to 4” wide.
• Lockable frame arms hold your bikes securely and can be attached to any part of the frame, or the seat post.
• Locks to the tow ball.
• The upright can be raised so it’s suitable for bikes with very large frames.
• It tilts to allow access to the boot, even with the bikes fitted. It is genuinely easy to tilt and well balanced during the tilting phase.
• Dimensions: 134 x 72cm deep (measured from the centre of the tow ball to the outside edge of the number plate holder).
• Weight: 18.1kg.
• It folds so you can easily store it in your boot when required, making finding a parking space before your ride much easier. It’s even small enough to fit it in the back of most cars if your boot is full.
• A built-in transport wheel makes it as easy as possible to get the rack to and from your car. You won’t even need to lift the rack until you put it on the tow bar. Because it folds it’s much easier to maneuver.
• Comes with a 5 function 13 pin lighting system.
• All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!
• A loading ramp is available separately.
• The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. All tools you might need are provided.
• We also think it looks great!

Schwalbe 29er/650B Tube

Extremely reliable!

Each Schwalbe tube is individually examined twice at the factory to ensue air-tightness. Special quality control that prevents unpleasant surprises.

Features:

• Fits large range of tyre sizes
• Valve Type: FV (French Valve) = PV (Presta Valve)

SV 19 Will fit the following tyre dimensions:

• 50-584 27.5 x 2.00
• 57-584 27.5 x 2.25 650 x 60B
• 54-584 27.5 x 2.10 650B
• 60-584 27.5 x 2.35 650B
• 55-622 28 x 2.15
• 40-635 28 x 1 1/2 700 x 38B
• 40-622 28 x 1.50 700 x 38C
• 42-622 28 x 1.60 700 x 40C
• 47-622 28 x 1.75 700 x 45C
• 50-622 28 x 2.00
• 60-622 28 x 2.35
• 54-622 29 x 2.10
• 47-622 29 x 1.75 700 x 45C

SV 19F Will fit the following tyre dimensions:

• 65-584 27.5 x 2.60 27.5+
• 70-584 27.5 x 2.80  27.5+
• 75-584 27.5 x 3.00  27.5+
• 60-584 27.5 x 2.35 650
• 54-622 29 x 2.10
• 57-622 29 x 2.25
• 60-622 29 x 2.35
• 62-622 29 x 2.40
• 65-622 29 x 2.60 29+
• 70-622 29 x 2.80 29+
• 75-622 29 x 3.00 29+

Give your bum a gift and get your own gel bike seat cover, make any bike super comfortable!

Seat cover for bikes and exercise bikes with Royalgel™ technology that absorbs pressure in the genital and ischial area. Medium Size.

Features

RoyalGel: Thanks to its unique tridimensional gel structure, Royalgel™ guarantees the highest level of comfort, reducing pressure peaks by 40% compared to standard padding materials.

Specifications

L 258mm / W 226mm / W 264g

Great all purpose rack, designed for panniers.  Says "non-disc" but depends where your brake rotor is, fits perfectly on FOCUS Jarifa. (even though has disc brakes the location of the calipers means the 'non-disc' rack fits better)

For 24”-29” & 700C Wheels. This one-size-fits-all aluminium tubular rear rack is equipped with adjustable legs to fit most 24” to 29” wheel MTB and 700C touring bikes. This tough tubular rack is designed for heavy-duty, long distance touring. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack® plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market.

Jagwire’s Sport Organic pads feature an all-new resin compound, mounted on a steel backing plate. The pads will give good power and modulation, while keeping noise to a minimum. These pads are great for riders primarily riding in dry conditions.

• Compound: Organic
• Backing Plate: Steel
• Good Stopping power
• Good Modulation
• Best in Dry Conditions

Compatibility

• Tektro®: TRP® Quadiem, G-Spec Quadien, Slate T4, G-Spec Slate
• Shimano®: Saint M820, M810, ZEE M640

Want to save your ass from the bumps but not spend $2,000 extra on rear suspension - then this is for you!

The new Cane Creek Thudbuster G4 Seat Post has been updated to deliver even better performance and ease of use. These unique parallel linkage seat posts offer riders plush travel to significantly absorb and diminish shocks and impacts from a range of terrain. The tool free interchangeable elastomer inserts offer a range of preset dampening adjustments to make it easy to dial in what best suits your requirements. This is very likely the most advanced suspension seat post on the market today.

Available a in a short travel option (ST) with 50mm of travel, or a long travel option (LT) with 90mm of travel.

I only have 31.6mm diameter in stock so if you don't have a FOCUS check you seat post diameter.

Who's this item for: Commuters and Gravel riders looking for a rigid seat post that soaks up a range of impacts to offer a plush riding experience

Actuation style: Parallel linkage

Spring style: Medium firm elastomer pre-installed from the factory. Soft and Firm

Infinite or finite adjustments: Finite adjustments can be made by replacing the elastomers. Choose between soft and firm elastomers that are included. Extra Soft and Extra Firm elastomers are sold separately.

Saddle clamp style: Single bolt fastening and angle adjustment design

Weight:

• ST: 580g (31.6)
• LT: 750g (31.6)

• ST: 150kg
• ST: 113kg

• ST: 50mm
• LT: 90mm

• 0mm setback (unweighted)
• Pivots are threaded and serviceable with hard anodized aluminium axles flanged PTFE bushings
• 50mm or 90mm of travel to suit your preference

• Thudbuster G4 Seat Post
• One soft and firm elastomer

With the Bordo, ABUS has revolutionised the bicycle lock and established an entirely new type of lock – the folding lock. Ideal for E Bikes, the Bordo offers features that have not been provided by any other design to date. Light-weight flexibility in a compact design. And with a handy U-Grip  bike attachment it is easily and securely transported neatly out of the way.

Available as a Keyed lock or a Combination Lock.

A great flashing front light.. make sure they see you coming!

A bright urban commuter bike light ideal for those daily commutes from the 'burbs to the big smoke. Outputting 80 lumens of light at the front and 44 at the rear this bright bike light ensures you are well seen not just to road riders ahead of you, but those behind too up to 1.2 kilometres away. With its focused 35° beam, reflective faceplate, long battery life and 5 different light modes (2 constant & 3 flash), you're guaranteed to light up all night long, no matter where you ride. And its secret weapon? 2 x front & 3 x rear interchangeable straps so you can swap the lights between bikes with different sized seatpost and handlebars - including aero seatposts and oversize bars.

Specifications

• Dimensions: 42x42x62mm
• Weight: 35g
• Materials: UV-Resistant Industrial grade silicone, Polycarbonate Housing, Polycarbonate Optical grade PMMA Lens, Hard-Anodised aluminium fascia.
• LEDs: Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode.
• Battery: Integrated rechargeable Lithium Ion battery
• Peak brightness: Front: 80 Lumens, Rear: 44 Lumens
• 5 Light modes: Steady high, steady low, strobe flash, fancy flash, eco flash.
• Run-time: Blinder MOB front lasts 2.4 - 3.2 hours in Steady High mode, 4.1 -8 hours in Steady Low, 3.5-5.7 hours in Strobe Flash, 3.2 - 23 hours in Unique Flash and 58.6 - 75.7 hours inEco Flash. Blinder MOB rear lasts 2 - 2.6 hours in Steady High mode, 5.6 - 6.1 hours in Steady Low, 2.7 - 4.5 hours in Strobe Flash, 2.6 -12.6 hours in Unique Flash, 53.3 - 66 hours in Eco Flash.
• Waterproof: The Blinder MOB is IP67 Tested and 100% waterproof against all elements
• Beam angles (degrees): 120°
• Bar Diameters: Fits bars / posts 22-32mm+ and aero.

Features

• Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead.
• Visibility: Front light 1200+ metres. Rear light 1000+ metres
• Low battery indicator
• Integrated USB Plug Designed to be exposed to the elements, is waterproof and will not be damaged by exposure. 
• Replaceable strap for tool-less attachment. 2x removable FRONT light straps for bars 22-27mm / 27-32mm and 3x removable REAR light straps for posts 22-32mm+ and AERO POST COMPATIBLE
• 4-5 hour charge time 

Lasts 2-3 times longer, seals a little slower, and doesn’t seal quite as large a hole as regular. Endurance is for the less technical rider and looking for longer sealant time.

We love these Mountain Bike racks, in fact all our tour bikes are stored on these racks as they save so much space and are super strong.  Easy to put on and off once you master the knack.  Comes in two styles, for bikes with no fenders (MTB style like Jarifa2 or Thron2) and for Mountain Bikes with fenders (Aventura or Thron EQP)

Our Mountain Bike (MTB) Rack is designed with larger and stronger folding arms to handle both regular MTB tyre sizes as well as plus size tyres. In fact our MTB rack is also suitable for any bike with larger tyre sizes and including E-Bikes and heavy bikes up to 35kg.

If you have different brands and models of bike no need to worry about the frame geometry or size, as long as have round front wheels they will fit our racks.

Like all of our racks, you can swivel or pivot your bike side to side almost 180 degrees and it folds flat when not in use for maximum storage and space efficiency and our MTB Racks can be mounted on any wall or vertical surface.

Precision products require precision tools. Our Torque wrench is designed for ease of use when mounting and maintaining high end products (particularly carbon components) on bikes. Simply set your desired torque and you cannot over tighten a bolt risking damage to the component or bolt head. The kit is complete with a range of bits, an extension head, instructions and a tough case to keep it safe. An essential part to any home mechanics arsenal.

2-24Nm covers most things on your bike (including saddles)

MATERIAL

Alloy handle

WEIGHT

270g approx.

NUMBER OF TOOLS

9

TOOLS DESCRIPTION

Hex 3/4/5/6/8/10

T20/T25/T30 socket bits

25mm socket adaptor and 75mm extension

FEATURES

​Adjustable torque tool with 1/4“ drive with alloy handle
Torque range 2-24 Nm
Accuracy ±4%
Supplied with bit set.

DIMENSIONS

SYNCROSS220mm