Useful accessories

“THEY SAID THE WORLD WAS FLAT…”
The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty. The Horizon is our Multiple award winning pedal design. Read here for MBR magazine 10/10 review

Designed in conjunction with 5 time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles.

Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services.

Available in a multitude of configurations and materials, this is a pedal ready to tackle whatever you can throw at it.

Horizon – Pro

With all of the features seen on the Horizon Sam Hill signature pedal, but in a much more stealth package with a black anodised platform including subtle laser etch graphics and accompanied by black adjustable pins. Available with both a Cro-Mo axle or Titanium axle.
“THEY SAID THE WORLD WAS FLAT…”
The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty. The Horizon is our Multiple award winning pedal design. Read here for MBR magazine 10/10 review

Designed in conjunction with 5 time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles.

Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services.

Available in a multitude of configurations and materials, this is a pedal ready to tackle whatever you can throw at it.

Horizon – Pro

With all of the features seen on the Horizon Sam Hill signature pedal, but in a much more stealth package with a black anodised platform including subtle laser etch graphics and accompanied by black adjustable pins. Available with both a Cro-Mo axle or Titanium axle.
“THEY SAID THE WORLD WAS FLAT…” The Nukeproof pedal range has been extensively engineered to offer the optimum balance of strength and fatigue resistance with minimum weight penalty. The Horizon is our Multiple award winning pedal design. Designed in conjunction with 5 time downhill world champion Sam Hill, we have created a flat pedal that incorporates a large platform, adjustable pins and angled faces to aid deflection from obstacles. Each pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services. Available in a multitude of configurations and materials, this is a pedal ready to tackle whatever you can throw at it. Horizon – Pro. With all of the features seen on the Horizon Sam Hill signature pedal, but in a much more stealth package with a black anodised platform including subtle laser etch graphics and accompanied by black adjustable pins. Available with both a Cro-Mo axle or Titanium axle.

FEATURES

• 10 rear loading custom hexagonal removable pins per side for maximum grip
• Ultra thin leading edge chamfered design to deflect off any obstacle 
• Fully sealed and serviceable design with built in bearing extractor
• Wide platform design for increased stability
• Contoured shape provides ultimate connected feel

 

SPECS   

COMPATIBILITY

• Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks.
• These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation. 

INSTRUCTIONS

Ensure flange pedal washer and lip seal are assembled with flange side towards crank. In the following orientation.

Install with 8mm Hex. Torque to 35Nm (25 ft-lbs) Min

NOTE:

 

 

Maintenance and Rebuild Procedure

Syncros designed, complete line of bottle cages, with a low profile design and a side entry for easy access on full-suspension frames or small frame sizes. Made from a clever combination of carbon fiber and composite to keep the weight down and available in a large variety of colors, there is a bottle cage just for you. This cage is optimized for right handed entry. There is also a left handed version.

If you are right handed I find the 'left cage' is easier as you can steer bike with right hand and pull out bottle with your left!

At last a non-plastic bike bottle.  Fits into bike cages and silver or black looks fantastic on the FOCUS bikes looks fantastic.

Klean Kanteen were the first brand of stainless steel water bottle ever produced, and today, they're still the best quality water bottle in the market. This bottle features the Sports 3.0 lid which has been engineered for the best water flow available on this type of bottle and the whistling sound in earlier versions has been eliminated.

It features a 4.4cm wide opening which makes for easier cleaning with a bottle brush and plenty of room to drop down ice cubes and fruit. The slim design of the 12oz, 18oz and 27oz sizes make them the ideal size for car cup holder and most bike cages.

The inside of all Klean Kanteen stainless steel water bottles are electropolished so they don't retain or impart flavour like cheaper stainless steel bottles do. The corners of the bottles are rounded, and a lot more rounded than other designs, which means you're less likely to damage it if you happen to drop it.

Features

• 18/8 Stainless Steel construction.
• Klean Coat™ powder coat finish is 4X more durable than our previous finish and formulated for human and environmental health (Brushed Stainless has no coating).
• Electropolished interior, a safe & non-toxic process, and rounded corners make it easy to clean.
• Includes spill proof, high flow Sport Cap 3.0. Cap is not designed to be leakproof.
• Compatible with all Classic Caps, including the leak proof Loop Cap & plastic-free Bamboo Cap.
• Backed by the lifetime Strong as Steel guarantee.

Rear Vision Mirror with 360 Degree Rotation Keep yourself aware of traffic approaching you from the rear with this AZUR ORBIT bar-end-mounted bicycle mirror. Built with a Universal bar end fitting, the mirror features a swivel ball joint for 360 degree rotation so you can choose the viewing angle which suits your needs perfectly.

Anti-Glare Mirror Surface Suitable for day and night time use, its anti-glare mirror surface helps to cut down on headlight and sun glare while a reflective safety strip improves your visibility to other road users. Easy to install and able to fold for storage and protection the AZUR ORBIT rear vision bike mirror is a very reasonably priced safety accessory that every cyclist should own and use.

Easy mounting in bar end

Protect your paintwork and park using a stand!

Kickstand to fit FOCUS Thron2 and Jarifa2 E Bikes.

Bolts to fixing points on bike

With the Bordo, ABUS has revolutionised the bicycle lock and established an entirely new type of lock – the folding lock. Ideal for E Bikes, the Bordo offers features that have not been provided by any other design to date. Light-weight flexibility in a compact design. And with a handy U-Grip  bike attachment it is easily and securely transported neatly out of the way.

Available as a Keyed lock or a Combination Lock.

Kick stand for all FOCUS and Kalkhoff E Bikes. Protect your paintwork and make parking your bike so much easier.  Securely attaches to frames of both FOCUS Hardtail and Full Suspension E Bikes as well as any bike with a 40mm stand attachment points.

We love these Mountain Bike racks, in fact all our tour bikes are stored on these racks as they save so much space and are super strong.  Easy to put on and off once you master the knack.  Comes in two styles, for bikes with no fenders (MTB style like Jarifa2 or Thron2) and for Mountain Bikes with fenders (Aventura or Thron EQP)

Our Mountain Bike (MTB) Rack is designed with larger and stronger folding arms to handle both regular MTB tyre sizes as well as plus size tyres. In fact our MTB rack is also suitable for any bike with larger tyre sizes and including E-Bikes and heavy bikes up to 35kg.

If you have different brands and models of bike no need to worry about the frame geometry or size, as long as have round front wheels they will fit our racks.

Like all of our racks, you can swivel or pivot your bike side to side almost 180 degrees and it folds flat when not in use for maximum storage and space efficiency and our MTB Racks can be mounted on any wall or vertical surface.

TWO LEFT IN STOCK

Matching ramps to load E Bikes on this link

The best E bike car rack there is.

When it comes to transport of heavy bikes such as MTB or E-bikes, the e-SCORPION 2 would be the supreme choice. High load capacity, fully foldable, easy-to-use with great stability, durability and a touch of simplicity in design.

We think that E-Scorpion deserves to be a top choice for anyone who wants to carry 2 bikes, especially larger, heavy bikes or electric bikes. It’s a hugely versatile rack that can take a big range of different types of bikes. Whatever bike you have now (or in the future) the E-Scorpion should be able to accommodate it.

Bike carriers that are strong enough for electric bikes tend to be pretty beefy themselves, so handling these heavier bike carriers can be awkward. The Scorpion is a solid carrier at 18.1kg, but because it folds up it’s relatively very easy to move about and to fit, without straining your back. It’s even got an integrated transport wheel so you won’t have to do much lifting of the rack. Just wheel it to the tow ball in the folded position – there’s a handle above the tow ball clamp, so it’s an easy vertical lift. Place it over the tow ball – you’ll be standing above the tow ball, not some distance behind it. You’ll also find that the E-Scorpion stays level and does not crash to the ground when you let go of it. Tighten, lock, unfold – all parts click into place, including the number plate holder.

It’s particularly easy to tilt, with the tilt control just above the number plate. The lights are 5 function – they include a reversing light and a fog light if you have a 13 pin socket.

Other features and specifications:

• The patented conical fitting fits to all tow balls.
• The Buzz E-Scorpion is particularly well balanced – you can let go once you’ve placed it on the tow ball, which makes fitting the rack much easier.
• You mount it to the tow ball from folded, this gives you loads of space to fit it to the car (no bashing shins or straining your back).
• It’s easy to fit to the tow ball. Fitting is a matter of spinning a hand-turning wheel, a really quick, easy and ergonomically satisfactory thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Additional tensioning is included (using the integrated handle), depending on the tow ball, to make sure the carrier is firm.
• It sits high on the tow ball, well clear of speed bumps and other hazards such as steep ferry ramps.
• The wheel holders will accommodate larger wheelbases; up to 129.5cm.
• Ratchet straps allow a quick and secure attachment of the wheels, long straps can accommodate tyres up to 4” wide.
• Lockable frame arms hold your bikes securely and can be attached to any part of the frame, or the seat post.
• Locks to the tow ball.
• The upright can be raised so it’s suitable for bikes with very large frames.
• It tilts to allow access to the boot, even with the bikes fitted. It is genuinely easy to tilt and well balanced during the tilting phase.
• Dimensions: 134 x 72cm deep (measured from the centre of the tow ball to the outside edge of the number plate holder).
• Weight: 18.1kg.
• It folds so you can easily store it in your boot when required, making finding a parking space before your ride much easier. It’s even small enough to fit it in the back of most cars if your boot is full.
• A built-in transport wheel makes it as easy as possible to get the rack to and from your car. You won’t even need to lift the rack until you put it on the tow bar. Because it folds it’s much easier to maneuver.
• Comes with a 5 function 13 pin lighting system.
• All parts are replaceable if e.g. someone forgets that a tow bar carrier is fitted and reverses into a wall – which happens!
• A loading ramp is available separately.
• The build quality – tube bending, welding, rust proofing, painting, component quality, is exemplary. All tools you might need are provided.
• We also think it looks great!

Specially designed to fit the e-SCORPIONS, the new e-RAMP is a simple to use product, and small enough to store in the car trunk. Made of high grade aluminium, it is a very strong and stable way to load your heavy bikes on the e-SCORPIONS racks.

Specially designed to fit the e-SCORPIONS, the new e-RAMP is a simple to use product, and small enough to store in the car trunk. Made of steel, it is a very strong and stable way to load your heavy bikes on the e-SCORPIONS racks.

• Max load capacity: 30kg
• Max tire size: 4″
• Dimensions (length extended x width): 114cm x 12.5 cm
• Weight: 2.9kg
• Made of: Steel

A tough tubular aluminum rear rack designed specifically for mountain bikes. The perfect rack for classic loaded touring, commuting or just running errands. QuickTrack® compatible for use with any MTX TrunkBag and rear basket.

Even though says non-disc if your brake calipers are not in way can fit on a disc brake wheel.  Fits perfectly on FOCUS Jarifa 29" Wheel. 

Product No: TA2026-B

Great all purpose rack, designed for panniers.  Says "non-disc" but depends where your brake rotor is, fits perfectly on FOCUS Jarifa. (even though has disc brakes the location of the calipers means the 'non-disc' rack fits better)

For 24”-29” & 700C Wheels. This one-size-fits-all aluminium tubular rear rack is equipped with adjustable legs to fit most 24” to 29” wheel MTB and 700C touring bikes. This tough tubular rack is designed for heavy-duty, long distance touring. The integrated side bar provides a lower pannier attachment point allowing more space for cargo on top of the rack. The MTX QuickTrack® plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market.

We hate throwing away batteries at Beyond Byron E Bikes, so we only sell rechargeable lights and we reckon this is a classic everyday light.

500 Lumens and 50 Hours on a charge.

The Cateye AMPP EL085RC 500 Lumen Front is a compact all in one headlight that is perfect for cycle commuters or road riders that need to ride at night or in low-visibility conditions.

The AMPP500 headlight has a wide beam with OptiCube technology and excellent side visibility to help cars and other vehicles see you at night. The light easily mounts to the bars via the Flextight bracket and the quick release button makes it easy to remove the light from the bracket. There are four lighting modes (High / Low / Daytime HyperConstant / Flashing) and a mode memory function.

Who's this item for: This light set is perfect for cycle commuters or anyone that needs to ride their bike on the road or cycle paths at night. 

LED Type: High-intensity white LED X1

Battery Type: Li-ion rechargeable battery (3.6V-2200mAh)

Small but mighty, the Kepler E-bike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V e-bike system, this slick little light is loaded with 3 super bright red power LED's. Equipped with a pre-installed Bosch plug the Kepler E-bike Tail Light is ready to plug directly into any Bosch e-bike system. The Bosch plug can also easily be clipped off for direct wiring into other e-bike systems. 

Specifications

• Includes Bosch E-bike System plug
• Remove Bosch plug to work with any 6V-15V e-bike system
• 3 red power LEDs
• Seatpost or seatstay mounting
• 220 degrees of visibility
• 25 Lumens
• Tail light cable length is 48"

A great flashing front light.. make sure they see you coming!

A bright urban commuter bike light ideal for those daily commutes from the 'burbs to the big smoke. Outputting 80 lumens of light at the front and 44 at the rear this bright bike light ensures you are well seen not just to road riders ahead of you, but those behind too up to 1.2 kilometres away. With its focused 35° beam, reflective faceplate, long battery life and 5 different light modes (2 constant & 3 flash), you're guaranteed to light up all night long, no matter where you ride. And its secret weapon? 2 x front & 3 x rear interchangeable straps so you can swap the lights between bikes with different sized seatpost and handlebars - including aero seatposts and oversize bars.

Specifications

• Dimensions: 42x42x62mm
• Weight: 35g
• Materials: UV-Resistant Industrial grade silicone, Polycarbonate Housing, Polycarbonate Optical grade PMMA Lens, Hard-Anodised aluminium fascia.
• LEDs: Surface Mount (SMT) LED designed to provide maximum brightness level for up to 90% of the battery burn time for each mode.
• Battery: Integrated rechargeable Lithium Ion battery
• Peak brightness: Front: 80 Lumens, Rear: 44 Lumens
• 5 Light modes: Steady high, steady low, strobe flash, fancy flash, eco flash.
• Run-time: Blinder MOB front lasts 2.4 - 3.2 hours in Steady High mode, 4.1 -8 hours in Steady Low, 3.5-5.7 hours in Strobe Flash, 3.2 - 23 hours in Unique Flash and 58.6 - 75.7 hours inEco Flash. Blinder MOB rear lasts 2 - 2.6 hours in Steady High mode, 5.6 - 6.1 hours in Steady Low, 2.7 - 4.5 hours in Strobe Flash, 2.6 -12.6 hours in Unique Flash, 53.3 - 66 hours in Eco Flash.
• Waterproof: The Blinder MOB is IP67 Tested and 100% waterproof against all elements
• Beam angles (degrees): 120°
• Bar Diameters: Fits bars / posts 22-32mm+ and aero.

Features

• Lens: Use of an optic design to provide a balanced ratio of beam width and distance to safely illuminate you and the path ahead.
• Visibility: Front light 1200+ metres. Rear light 1000+ metres
• Low battery indicator
• Integrated USB Plug Designed to be exposed to the elements, is waterproof and will not be damaged by exposure. 
• Replaceable strap for tool-less attachment. 2x removable FRONT light straps for bars 22-27mm / 27-32mm and 3x removable REAR light straps for posts 22-32mm+ and AERO POST COMPATIBLE
• 4-5 hour charge time 

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality.

The Small Oi Luxe fits 22.2mm bars.

The Origami Rear Fender is super light, easy to install and fits almost any bicycle. Punch it out from its packaging, fold it along on the seams, and snap it onto the mount. Pack down and throw it into your backpack when the weather conditions improves.

Get the matching Origami Front Fender to complete your splash protection set!

DETAILS
Rear fender measures 445 mm (17.5") long and weighs 160 g (5.6 oz)
Rear fender installation manual (PDF)
Lifetime PDWarranty

LIKE A HELMET FOR YOUR TYRES!

No more messing round with, and endlessly replacing, sealant and better grip offroad than using puncture proof tyres like Schwalbe Marathon Plus.  Just pop in these to your existing tyres to create virtually puncture proof tyres... 

• Eliminates 90% of all punctures
• Easy installation
• Run flat capable
• Protects your rims

Note you will need smaller tubes to optimise performance, see chart in images

• 1.9"-2.5" insert: 1.5”-1.9” tube 
• 2.6"-3.0" insert: 1.9"-2.3" tube

Have us fit your Tannus to your new E Bike for you

there is a certain knack to it to get them in with no bumps.  Will our trusted mechanic has perfected it. 

this is cost to fit two Tannus to a new bike only 

Updated with a new material and new design. The TL-4.2 features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed. Perfect for tight beads and tubeless tires.

Precision products require precision tools. Our Torque wrench is designed for ease of use when mounting and maintaining high end products (particularly carbon components) on bikes. Simply set your desired torque and you cannot over tighten a bolt risking damage to the component or bolt head. The kit is complete with a range of bits, an extension head, instructions and a tough case to keep it safe. An essential part to any home mechanics arsenal.

2-24Nm covers most things on your bike (including saddles)

MATERIAL

Alloy handle

WEIGHT

270g approx.

NUMBER OF TOOLS

9

TOOLS DESCRIPTION

Hex 3/4/5/6/8/10

T20/T25/T30 socket bits

25mm socket adaptor and 75mm extension

FEATURES

​Adjustable torque tool with 1/4“ drive with alloy handle
Torque range 2-24 Nm
Accuracy ±4%
Supplied with bit set.

DIMENSIONS

SYNCROSS220mm

Many derailleur chains use a “master link” that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. MLP-1.2 Master Link Pliers make removal and replacement of these masterlinks quick and effortless. Simply insert the specially sized jaws into the masterlink and squeeze the handles.

Add that extra flair to your wheelset with Muc-Off's Tubeless Valve Kit. No matter what kind rims your bike has this universal tubeless valve kit will suit with both flat and curved rubber bases included to  ensure a perfect seal. There is also a valve core remover that is integrated into a spare alloy cap! Brilliant! 

Colour: Purple

Features:

• 6061 Aluminum machined stem 
• 6061 Aluminum machined cap
• 4mm machined Allen Key slot for easy installation / removal
• Includes Valve Core Removal Tool (intergrated into spare alloy cap